Oakville homes carry a lot of trim and a lot of height, and both deserve a clear price. IntraBuild works as painters in Oakville from a base next door, using one published rate card. Walls start at $700, covering the first 100 sq ft of floor. That is also the typical smallest project in town. Prices are before HST.
Oakville splits at the QEW, and so does the work. South of the highway, Old Oakville, Bronte and the streets around Kerr Village mix century houses with mid-century homes. Expect plaster patched over many years, deep window returns and original trim the owners want to keep. Colour choices there are often subtle: off-white walls against bright trim, where clean lines matter more than usual.
North of the highway, Glen Abbey, River Oaks, Joshua Creek and West Oak Trails are larger and newer. Main floors often have 9 or 10 ft ceilings, tray or coffered ceilings and wide baseboards. The walls are usually sound, so the time goes into height and trim. Ceilings over 8 ft are priced in writing before you agree.
Two points are worth knowing before you compare quotes. Complete Home covers walls, ceilings, baseboards and door and window casings. Crown moulding, wainscoting and stair railings are not in it. If your home has them, they are listed and priced in your written specification. For tired plaster that needs real correction, or for premium coatings throughout, Signature Finish is the package, priced after a free visit.
Some owners here arrive with colours and sheens already chosen. We follow that list surface by surface, and the exact product is named on your specification.
Oakville is a short drive from our base, so the smallest job here is typically the package start. That means $700 for walls, $800 with ceilings, or $970 for the full interior with one door. A powder room or a single bedroom can be booked on its own. Minimums are tied to the exact address rather than the town, so your written price states which one applies. The rate per sq ft is identical in every town we work in.
Residential painting, priced by the size of the rooms. The three standard packages get the same preparation, protection, cleanup and warranty; the difference is which surfaces are included. Signature Finish adds enhanced prep and premium coatings. Move the slider to see the total for your floor area.
Set your painted floor area, pick a package and add your town for a typical minimum. It runs on the same rates as the cards.
Take a Glen Abbey two-storey where the painted rooms total 2,250 sq ft of floor, with 12 interior doors. Complete Home covers walls, ceilings, baseboards and casings, plus the first door. The $970 start includes the first 100 sq ft. The other 2,150 sq ft at $4.10 add $8,815. Eleven extra doors at $120 add $1,320. The total is $11,105 before HST, for walls in normal condition. Ceilings above 8 ft, crown and wainscoting are priced separately in writing.
HST 13% $1,444 · with HST $12,549 · walls in normal condition
See this example in the calculatorThe rates are ranges, but your written price is one number. It says which rate applies to each room and why.
You choose the colours and give us the codes. The exact product is named in your specification, so you can look it up before we start.
We use the finished floor area of the rooms we paint. Paint rooms totalling 900 sq ft in a 2,500 sq ft home and the price uses 900.
Doors and extras count toward the total. If that total comes in below the minimum for your address, you pay the minimum, and your written price lists exactly what it covers.
A lived-in home, ceilings up to 8 ft, previously painted drywall in normal condition. Colour changes are included when two coats cover.
Most homes can be priced from photos alone. If something in them is unclear, we ask before we put a number on paper. A written price keeps both sides on the same page.
That can be a fair quote. To compare like for like, check what each one includes: how many coats, whether ceilings are in, what prep is listed, and whether the warranty is in writing.
A price over the phone would be a guess. Photos show the state of your walls, and that decides which rate applies to each room.
Getting set up, protecting the floors and cleaning up take nearly as long for one small room as for a bigger job. The start price covers that, so a small job gets the same care. Every sq ft beyond the start is charged at the published rate.
Start with the walls. Fresh Start paints walls only. Ceilings and trim can follow later as a separate job, priced in writing, though doing them together usually costs less.
We work across the whole town, from the lakeshore to the newest streets north of Dundas. South of the QEW, heritage details are noted room by room. North of it, the stair and ceiling heights are noted the same way.
To the east, see painters in Mississauga, while Milton and the wider Halton Region use the same rates. For what each package includes, see our interior painting page.
Your price per sq ft is the same in every town. Only the smallest project changes, and your written price shows what it covers.
Yes. Each surface goes into your written specification with its product and sheen. Trim usually takes a satin or semi-gloss enamel, walls an eggshell or matte, and ceilings a flat ceiling paint.
Usually not. Sound plaster with old patches can be skim-coated, sanded and primed, then painted. Skim coating is a separate item, priced once in your written price. It keeps the original trim in place and avoids demolition dust.
The rates are the same, but over 3,000 sq ft of painted floor we price after a visit. The visit is free, and there is no obligation to book. You then get one written price for the whole job.
Signature Finish adds wider patching, more sanding, a primer system where needed, premium coatings and detailed trim prep. It suits heritage rooms and walls under strong light. It is priced in writing after a free visit.
Yes. Professional-grade paint is included in every package. A premium line on a standard package is quoted at the difference in material cost, and Signature Finish uses premium coatings throughout.
By then, you have your specification, price and warranty terms in writing.
