Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed
Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed
Oakville builds to a higher standard — custom and luxury homes with high ceilings, big windows and pot lights that show every flaw — and IntraBuild does the drywall installation Oakville homeowners and builders trust to deliver a flawless Level 5 finish. From new custom builds in Glen Abbey and Joshua Creek to additions and renovations on the character homes of Old Oakville and Bronte, we hang the board, tape the seams and skim every surface glass-smooth, priced honestly by the square foot.
IntraBuild covers Oakville drywall installation across one of the GTA's most high-end towns — custom and luxury new builds where feature walls and Level 5 finishes are the standard, and additions and renovations to established character homes in Old Oakville and Bronte. Our crew hangs the board (drywall is also called sheetrock or wallboard), tapes and coats the seams, and skims to the finish level your walls need — one local crew, no travel fee across town. If you've searched "drywall installation near me" from an Oakville address, this is your crew. For the full picture of how we work, see our drywall installation services page — this page covers what's specific to Oakville: flawless Level 5 finishes for custom homes, and matching new drywall into the walls of established homes.
Sheets set plumb and tight on walls and ceilings, joints staggered, cut cleanly around outlets, windows and light boxes.
Mesh or paper tape over every seam, with corner bead installation on each outside corner — metal or paper-faced bead so edges stay crisp and crack-free.
Fasteners set just below the surface in a staggered pattern — about 28–32 per sheet — then spotted so nothing shows through paint.
Three coats of compound minimum, feathered wide, then sanded and dust-controlled to Level 3, 4 or 5.
A full skim coat over the entire surface — not just the seams and screws — so nothing telegraphs through under pot lights, floor-to-ceiling windows or raking light. On feature walls and anywhere a glossy paint will be used, it's the flawless finish luxury homes need.
Two-storey great rooms, curved walls and archways, coffered and tray ceilings, floating bulkheads and niches — whole-home board and finish worked from the architect's detail so every reveal and radius comes out crisp and consistent.
Established homes in Old Oakville and Bronte, where an addition or reno has to disappear into what's already there. We match new drywall to the height, thickness and trim lines of the existing walls, feathering the transition so the new work never reads as a patch.
Oakville sits right next to our Mississauga base, so there's no separate travel fee tacked on after — the same local crew measures, hangs and finishes across town, from Glen Abbey and West Oak Trails to Joshua Creek and the lakeshore.
The drywall installation cost Oakville homeowners pay comes down to area, so we quote by the square foot rather than a flat guess — board supplied and finished. As a rough guide, the jobs we price around town run about $2.00–$5.50 per square foot turnkey. Level 5 is more common in Oakville than almost anywhere — the full skim coat is what flawless luxury walls need, and its labour runs roughly double Level 4 — so a Glen Abbey new-build great room finished in Level 5, with high ceilings and pot lights, sits near the top of that range; an Old Oakville addition matched into existing walls and trim sits toward the lower-middle. Pick a finish level below; a fuller cost breakdown sits further down, and the full method behind these numbers lives on our drywall installation services page.
| A single room (12×12-ish) | $1,500–2,500 |
|---|---|
| One- or two-car garage (Level 3) | $1,500–3,000 |
| A full basement | $6,000–12,000+ |
| A whole floor / new build | scales up |
The turnkey rate is the whole job — board delivered and hung, taped, beaded, screws spotted, three coats, sanded to your level, daily cleanup. Prefer to buy your own board? A labour-only rate starts around $1.50/sq ft. Per sheet, figure $30–70 to hang and finish a 4×8. These drywall installation prices are guide ranges — a free written quote sets the exact drywall install cost before any board goes up.
A full price tied to your square footage — a local crew, so no separate travel fee tacked on after.
Poly barriers and vacuum-assisted sanding keep drywall dust out of the rest of the home.
Hang, tape, coat and sand days planned up front and coordinated with your other trades — the same whether it's an Old Oakville renovation or a new custom build in Glen Abbey.
Liability coverage before we start, and a sound, level surface your painter can walk straight onto.
Each stage has to be right before the next begins — and the mud coats need drying time between them, which is why good drywall can't be rushed. Ceilings go first: a drywall ceiling installation is boarded before the walls, so the wall sheets tuck up under it and support its edges. On residential walls the sheets usually run horizontally, though hanging drywall vertically suits some taller commercial walls — either way the aim is fewer, cleaner joints to finish.
In most Oakville homes, yes. Level 5 is a thin skim coat over the entire surface — not just the seams and screws — so nothing telegraphs through, even under pot lights, floor-to-ceiling windows or the raking light down a two-storey great room. On feature walls, high ceilings and anywhere a glossy paint goes, it's the finish that reads as truly flawless. For a garage or utility room, a Level 3 or 4 is still the sensible call.
Yes — it's a lot of what Oakville custom builds ask for. We board and finish curved walls and archways, coffered and tray ceilings, floating bulkheads, niches and feature walls, working from the architect's or builder's detail so the reveals and radii come out crisp and consistent.
Yes. On additions and renovations to established homes in Old Oakville and Bronte, we match the new drywall to the height, thickness and trim lines of the existing walls — feathering the transition and skimming as needed so the new work disappears into the old rather than reading as a patch.
Turnkey, figure about $2.00–2.75 per square foot for Level 3, $2.75–4.00 for a standard Level 4 and $4.00–5.50 for a Level 5 skim. Level 5 is far more common in Oakville, and its labour runs roughly double Level 4, so a custom home finished throughout in Level 5 sits at the upper end. The drywall installation cost in Oakville depends on size, ceiling height and finish level — a free written quote sets the exact number.
All of them, and the rest of town — Old Oakville and Kerr Village, Bronte and Bronte Creek, Glen Abbey and West Oak Trails, River Oaks and Uptown Core, Joshua Creek and Iroquois Ridge, Clearview and Eastlake. It's one local crew, so a new build in Glen Abbey gets the same team as an addition in Old Oakville.
Ceilings first. It lets the wall sheets butt up tight underneath and support the ceiling edges, for cleaner, stronger joints — which matters even more on the high ceilings common in Oakville homes.
How many screws per sheet of drywall? On a 4×8 wall, roughly 28–32, and more on ceilings — staggered and set just below the surface so the board holds flat without breaking the paper.
Almost certainly. As drywall installers Oakville homeowners and builders book directly, we cover the whole town — Old Oakville, Kerr Village and Bronte, Glen Abbey and West Oak Trails, River Oaks and Uptown Core, Joshua Creek and Iroquois Ridge, Clearview and Eastlake. Tell us your neighbourhood and a drywall installer Oakville locals trust will confirm and come measure.
Drywall installation isn't limited to Oakville — IntraBuild works right across the GTA and Southern Oakville, all on one written per-square-foot price with no separate travel fee.
Searching for drywall installers near me in Oakville? Send us the space — a Glen Abbey custom-build great room in Level 5, a coffered ceiling and archway, an Old Oakville addition matched into existing walls — and IntraBuild's Oakville drywall contractors will measure, recommend the finish level, price it by the square foot and set a schedule around your job. One local crew, no travel fee. Free, and no pressure.
Get a free quote