Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed
Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed
A town full of young families and nearly-new houses always has one more room to finish. IntraBuild boards Milton's builder basements, garages and bonus rooms — and whole homes for the subdivisions still rising — from Ford and Willmott across to Scott, Harrison and Beaty. Board hung, seams taped, everything sanded smooth, on a plain per-square-foot price.
The specialty inside our Milton drywall installation work is simple: the rooms builders leave unfinished. Basements still in studs, garages with bare framing, bonus rooms waiting over the garage — plus whole-home board for the master-planned streets still going up between Derry Road and the Escarpment. We hang, tape and coat (drywall, sheetrock, wallboard — same board, same craft) from our Mississauga base next door, which keeps scheduling quick and travel fees non-existent. Searched "drywall installation near me" from a Milton address? That's us. The full how-we-work picture lives on our drywall installation services page — what follows sticks to the Milton part: builder basements, garage boarding and the finishing that young family homes keep asking for.
Sheets go on straight and tight across walls and ceilings, joints staggered as we work, with tidy cuts around pot lights, switches and window openings.
Seams get mesh or paper tape, and every outside corner gets corner bead installation — metal or paper-faced profiles that keep edges crisp through years of family traffic.
Roughly 28–32 fasteners hold each sheet, staggered and driven just below the surface, then coated over so no screw head ever telegraphs through the paint.
Three coats of compound at minimum, feathered wide and sanded with vacuum dust control, to whichever of Level 3, 4 or 5 the room calls for.
Walk downstairs in most of Milton's newer homes and you'll meet studs, concrete and a rough-in — the room this town needs finished most. We board it with moisture-aware stock below grade, box ducts and beams into straight bulkheads, and hand back a smooth, paint-ready space for the playroom, rec room or guest bedroom the family actually needs.
Builder garages often arrive as bare studs or half-finished walls. We hang and finish them properly — fire-rated 5/8" Type X wherever code calls for it between garage and living space, an economical Level 3 elsewhere — so the space earns its keep as a gym, workshop or simply a garage that looks done.
A den closed in for the home office, a bonus room boarded over the garage, a tray ceiling or feature wall the builder skipped — the small-to-medium jobs young Milton households keep booking. We schedule tight, work clean around family routines and skim to Level 5 wherever pot lights would expose a seam.
Our base is in Mississauga, one town over, so a Milton measure books in days rather than weeks and board follows soon after — Ford and Willmott to Beaty, Timberlea and Old Milton. One written price, and the drive never shows up on it.
Square footage decides the drywall installation cost Milton homeowners actually pay, which is why our quotes are per square foot — board supplied and finished, never a flat guess. Local jobs run roughly $2.00–$5.50 per square foot turnkey. A garage boarded to Level 3 in Willmott sits near the bottom of that band; a builder basement in Scott — moisture-aware board, bulkheads around ductwork, a smoother finish — climbs toward the top. Pick your level below; a fuller breakdown waits further down the page, and the method behind the math lives on our drywall installation services page.
| A 12×12-ish bedroom or den | $1,500–2,500 |
|---|---|
| One- or two-car garage (Level 3) | $1,500–3,000 |
| The whole basement | $6,000–12,000+ |
| A full floor / new build | scales with size |
The turnkey figure covers everything — board dropped and hung, taped and beaded, screws spotted, three coats, sanding to your chosen level, cleanup daily. Buying board yourself? A labour-only rate starts around $1.50/sq ft; per 4×8 sheet, budget $30–70 hung and finished. These drywall installation prices are guides — the free written quote nails your exact drywall install cost before install day.
Your square footage, priced in full and put in writing — and since we're based next door, no travel line ever appears on top.
Zip-wall poly and vacuum sanding keep the dust in the workspace — which matters when the kids' rooms sit one floor above the basement we're finishing.
Hang, tape, coat and sand days get booked up front and meshed with your electrician, plumber and painter, so a Milton basement or garage never stalls between trades.
Covered by liability insurance before work starts, and the surface we leave behind is flat, sound and ready to prime.
Mud has to dry between passes, so a good finish takes the days it takes — no stage starts until the one before it is right. Order matters as much as patience: a drywall ceiling installation gets boarded ahead of the walls, letting the wall sheets tuck underneath and support the ceiling edges, and on house walls the sheets normally run horizontally (hanging drywall vertically suits some taller commercial work) so there are fewer, cleaner joints to tape and coat.
It's the job we do most in Milton. Builders hand over studs, concrete and a rough-in; we hand back a finished room — moisture-aware board below grade, ducts and beams boxed into neat bulkheads, seams coated and sanded ready for paint. Upstairs stays clean and lived-in while it happens.
Yes. Finishing your basement or boarding your garage is your own project, separate from the builder's warranty on the base house. We don't touch anything the builder originally finished, so the warrantied areas stay exactly as delivered — a quick skim of your warranty terms first is smart, but this is routine work across Milton's newer communities.
Happily — that's how a builder-basic room becomes yours. Tray ceilings, coffers, dropped bulkheads and feature walls get framed and boarded after handover, then finished to Level 5 wherever pot lights or raking light would give a seam away.
Roughly $2.00–2.75 per square foot turnkey at Level 3, $2.75–4.00 at Level 4, and $4.00–5.50 for a Level 5 skim. Garages price lean; basements carry moisture-aware board and more cutting, so they run higher per foot. Size, ceiling height and level set the final figure — the free written quote makes it exact.
All of them, plus the rest of town: Ford and Willmott, Scott and Harrison, Coates and Dempsey, Beaty and Bronte Meadows, Timberlea and Old Milton, Cobban and Walker. Everything sits a short drive from our base — give us the street and we'll book the measure.
Ceilings first, walls after. That way the wall board tucks under the ceiling sheets and props up their edges — tidier joints all round, and doubly useful on the bulkheads and tray ceilings newer Milton homes carry.
On a 4×8 sheet on a wall, plan on 28–32 screws, staggered across the studs, with ceilings taking more. Each one is driven just below flush — never through the paper — then coated so nothing shows after painting.
Almost certainly. Milton families and builders book us directly as their drywall installers right across town — Ford and Willmott, Scott and Harrison, Coates and Dempsey, Beaty and Bronte Meadows, Timberlea and Old Milton, Cobban and Walker. Send your neighbourhood and we'll confirm and come measure.
Beyond Milton, the same crew boards and finishes across the GTA and Southern Ontario — one written per-square-foot price, never a separate travel fee.
If you've been searching drywall installers near me in Milton, here's the shortcut. Tell us about the basement still in studs, the unboarded garage, the bonus room over it — IntraBuild's Milton drywall contractors will measure, recommend a level, write the per-square-foot price down and book the work around family life. We run from right next door, so there's no travel fee and no long wait. Free, and no pressure.
Get a free quote