Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed
Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed
Brick came first in Brant. Brantford's Victorian streets, Paris's cobblestone-trimmed downtown, St. George's estate lanes — the county's character homes were plastered generations ago, and much of our work is giving those walls a second life in clean, flat drywall. The rest is newer: rentals near the Laurier Brantford campus turning over between terms, West Brant and Empire subdivisions finishing their basements, farm additions out toward Burford and Scotland. The brant county drywall installation you book here is hung, taped and sanded by one local crew, priced by the square foot, always in writing.
The County of Brant asks a drywall crew to be part restorer, part production boarder — and IntraBuild covers both jobs across the whole map. Brantford sets the tone: the Telephone City on the Grand River, where Alexander Graham Bell's name is everywhere and the Victorian brick streets are full of plaster now cracking off its lath, while the downtown hosts the Wilfrid Laurier University Brantford campus and Conestoga College students whose rentals need fast, durable wall turnarounds between leases. Empire and West Brant push the city outward subdivision by subdivision — and a few years behind every closing comes a basement to finish. Paris, where the Grand meets the Nith, adds cobblestone-era character homes and riverfront renovations that deserve careful boarding; St. George contributes estate builds and great rooms with ceilings worth a Level 5; and the farm villages — Burford, Scotland, Oakland, Mount Pleasant, Glen Morris, Onondaga, Cainsville — supply farmhouse additions and country new builds. One crew, one written square-foot price, no separate travel fee, and the estimator on your doorstep is the installer on your job. If "drywall installation near me" pointed you here from Brantford, Paris or the villages, you're exactly where you should be — the full working method sits on our drywall installation services page, while this page belongs to Brant County.
Whether the framing is 1890s rough-sawn or last month's steel stud, sheets go on plumb, joints staggered, cutouts scribed tight to boxes and openings.
Paper or mesh tape seals every seam, and outside corners are armoured with metal or paper-faced bead — crisp edges that stay crack-free through the seasons.
Sheets are fastened with roughly 28–32 screws apiece, staggered, sunk a touch below the surface and coated so they vanish for good.
At least three coats of compound, feathered wide and wider, then dust-managed sanding down to the exact Level 3, 4 or 5 finish specified.
Brantford's oldest streets went up when plaster was the only option, and a century and more later those walls are saying so. Plaster-to-drywall conversion is a staple here: strip to the studs, true the framing, board flat, finish smooth. Around the Wilfrid Laurier Brantford campus and Conestoga College the rhythm is rental turnover — student units re-boarded and paint-ready between leases — while Empire and West Brant keep a steady queue of new-subdivision basements waiting on moisture-smart board and a clean sand under the pot lights.
Paris trades on character, and drywall work there has to respect it. Heritage renovations in the cobblestone-era homes call for board that sits flush with hundred-year-old trim; riverfront properties near the Grand and Nith want humidity-aware choices; and the new subdivisions rising behind the old town want quick, clean whole-home boarding. All three get the same written per-square-foot price, the same finish care, and no travel fee.
The estate homes around St. George are built to be looked at, which makes their walls unforgiving. Great rooms under vaulted and cathedral ceilings, feature walls beneath wide glazing, custom builds where the drywall has to be as considered as the millwork — this is Level 5 territory, boarded plumb and skimmed until glancing light finds nothing. Additions and renovations in the village are held to the same standard, on the same square-foot pricing.
Out past the city grid the county turns agricultural — Burford and Scotland to the west and south, the river hamlets of Glen Morris, Onondaga and Cainsville, with Mount Pleasant and Oakland between. Farmhouse additions, out-of-square century rooms boarded back to true, country new builds with taller rural ceilings: village work is practical work, taped and sanded to level with the dust kept where we're standing, not where you're living.
There's no mystery in a Brant County drywall installation number: it's board area multiplied by the level's rate, delivered as one written turnkey price of roughly $2.00–$5.50 per square foot — board supplied and finished, travel never itemized. A St. George estate great room skimmed to Level 5 under vaulted glazing will press toward the ceiling of that range; a West Brant basement finished for everyday paint rests well beneath it. Pick your level from the cards, check the project table below, and find the full rate logic on our drywall installation services page.
| Room around 12×12 | $1,500–2,500 |
|---|---|
| One–two-car garage (Level 3) | $1,500–3,000 |
| Basement, start to finish | $6,000–12,000+ |
| Whole storey / new build | scales up |
That turnkey figure covers it all — board delivered and hung, tape and bead, spotted screws, no fewer than three coats, sanding to level, daily tidy-up. Board already on site? A labour-only price opens near $1.50/sq ft, which shakes out to about $30–70 per 4×8 hung and finished. Every range on this page is a compass, not a contract — the free written quote is what fixes your drywall install cost before board goes up.
We measure first, then hand over one complete written figure per square foot — Brantford, Paris or a farm lane past Burford, the drive never becomes its own line item.
Century floors get covered, doorways get sealed in poly, and every sander runs through a vacuum head — plaster-era houses stay liveable while we work.
Board day, tape day, the coat days and the sand all sit on the calendar before we start, slotted around your electrician, plumber and painter.
Liability coverage stands behind every job, and the walls we leave are true, cured and waiting on nothing but primer.
Compound is the honest part of this trade: every coat needs its drying time, and no amount of hurry changes that — a proper finish is measured in days, not hours. The order matters just as much. A drywall ceiling installation always comes before the walls, letting the wall sheets tuck under and brace the ceiling's edges; and on house walls the board runs horizontally as a rule — hanging drywall vertically is a tall-commercial-wall habit — because fewer joints always finish cleaner.
All of it. Brantford and Paris anchor the list, St. George follows, and the farm country fills in the rest — Burford, Scotland, Oakland, Mount Pleasant, Glen Morris, Onondaga and Cainsville along the Grand. No community out here carries a separate city page, so this Brant County page is home base for every one of them.
They're two of our favourite briefs. St. George's custom and estate builds bring vaulted great rooms and feature walls we board plumb and skim to Level 5, because raking light through big glazing forgives nothing. Paris asks for the opposite discipline: in the cobblestone-era and riverfront houses along the Grand and Nith, new board has to sit quietly against hundred-year-old trim, with humidity kept in mind, sloped ceilings handled patiently and dust kept out of the rooms you're living in.
Busier than anything else in town. A framed Brantford basement gets moisture-aware board near the bath and laundry, a smooth ceiling under the pot lights and one turnkey figure that usually lands around $6,000–12,000+, while Empire and West Brant add whole-home boarding every time a new phase closes. Around the Laurier Brantford and Conestoga campuses we also re-board rental units between leases — installation work run on a landlord's clock, priced by the square foot like everything else.
By level: about $2.00–2.75 per sq ft turnkey for Level 3, $2.75–4.00 for Level 4, and $4.00–5.50 for a Level 5 skim; a complete basement generally comes in around $6,000–12,000+. Footage, ceiling height and finish choice steer where a job lands inside those bands — the free written quote turns the range into your number.
No. The written square-foot price is the whole price whether we're parked in downtown Brantford or on a concession road past Oakland. Burford, Scotland, Mount Pleasant, Glen Morris, Onondaga, Cainsville — the county sits in Grand River country between Hamilton and Woodstock, and we treat every corner of it as local.
Because the wall sheets then rise to meet the ceiling and hold its edges captive — the perimeter joints come out stronger and straighter than they ever could the other way round.
Count on 28–32 across a 4×8 wall sheet, staggered along the studs, with a denser pattern overhead. Every head gets dimpled just below the paper without breaking it, then coated flush and forgotten.
It leads right here. Brant homeowners and landlords book us directly across the county — Brantford and Paris, St. George, Burford and Scotland, Oakland, Mount Pleasant, Glen Morris and Cainsville. Say which town and street, and the installer covering that corner of Brant will confirm and arrange the visit.
From Brant County the routes fan out — the installers who board Brantford and Paris work right across Southern Ontario and the GTA, on one written square-foot rate with the drive already inside it.
Tell us what the county handed you — cracked plaster in a Brantford Victorian, a West Brant basement still in studs, a Paris riverfront reno, a St. George great room, a farmhouse addition out past Burford — and IntraBuild's Brant County drywall contractors take it from there: measure, level recommendation, a square-foot price in writing and dates you can plan around. One local crew, no travel fee, and if drywall installation near me is how you found this page, the hunt ends here. Free, and no pressure.
Get a free quote