Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed

Drywall Installation Niagara Region — St. Catharines
NIAGARA.
Drywall installation · Niagara Region, Niagara Region

Drywall Installation
in Niagara Region

IntraBuild is a local Niagara Region crew covering the whole peninsula, so the drywall installation Niagara Region homeowners and builders book runs on local scheduling — established homes and downtown streets in St Catharines, residential and canal-side homes in Niagara Falls and Welland, and lakeside, escarpment and wine-country estate homes out in Grimsby. We hang the board, tape the seams and sand every surface smooth, priced honestly by the square foot.

Priced per sq ft
Level 3–5 finish
No travel fee
Drywall installation in Niagara Region — curved drywall archway
48h
Written quote turnaround
L3–5
Finish levels offered
3 coats
Minimum on every seam
$0
Travel fee — one written price
L3coat
L4smooth
L5
48hQuote turnaround
Level 5Glass-smooth option

IntraBuild is a Niagara Region drywall installation crew that works right across the peninsula — Niagara is large and varied, spanning the Garden City of St Catharines, the tourist city of Niagara Falls, canal-side Welland and the wine-country escarpment towns of Grimsby, Lincoln and Niagara-on-the-Lake. From established homes to lakeside estates, that means a full crew, fast scheduling, one written price — and even though Niagara sits well south of our base, no separate travel fee — with the person who quotes your job on site doing the work. We handle the drywall that Niagara homeowners and builders rely on — established homes and finished basements, canal-side additions, and custom builds along the escarpment and the lake. If you've searched "drywall installation near me" from anywhere in Niagara, you've found your crew. For the full picture of how we work, see our drywall installation services page — this page covers all of Niagara.

01
— what we install across Niagara

Board, tape, corners, coats.

far more than screwing up sheets

Hanging drywall

Sheets set plumb and tight on walls and ceilings, joints staggered, cut cleanly around outlets, windows and light boxes.

Taping & corner bead

Mesh or paper tape over every seam, with corner bead installation on each outside corner — metal or paper-faced bead so edges stay crisp and crack-free.

Screw spotting

Fasteners set just below the surface in a staggered pattern — about 28–32 per sheet — then spotted so nothing shows through paint.

Finishing to a level

Three coats of compound minimum, feathered wide, then sanded and dust-controlled to Level 3, 4 or 5.

Standard 1/2" — walls & ceilings Moisture-resistant — baths & laundry Fire-rated 5/8" Type X — garages, code spots Sound-dampening — bedrooms, media rooms Sag-resistant ceiling board
02
— across Niagara Region

One region, many communities.

the Garden City to wine country

St Catharines & Thorold — the Garden City

Established homes, downtown streets and Brock University rental properties across St Catharines and Thorold. The drywall installation St Catharines homeowners and builders expect: whole-home board and finish, basement and renovation work in the older neighbourhoods, and student-rental repairs, all handled by a local crew.

Niagara Falls & Welland — residential & canal-side homes

Residential and canal-side homes throughout Niagara Falls and Welland, with plenty of additions and finished basements. Whole-home board and finish, basement build-outs and renovations, coordinated with your framer, electrician and painter.

Grimsby, Lincoln & Niagara-on-the-Lake — wine-country estates

Lakeside, escarpment and wine-country estate homes out in Grimsby, Lincoln and Niagara-on-the-Lake. Custom builds and high ceilings — Level 4 and Level 5 finishes that stay glass-smooth under pot lights and big windows, priced by the square foot.

The south lakeshore — Fort Erie & Port Colborne

Cottages and family homes down along the south lakeshore in Fort Erie and Port Colborne. Additions, detached-home board & finish and higher ceilings handled cleanly, with the same per-square-foot pricing as the rest of Niagara.

03
— drywall installation cost in Niagara

Priced by the square foot.

per sq ft, never a flat guess

The drywall installation cost across Niagara Region comes down to area, so we quote by the square foot rather than a flat guess — board supplied and finished, with one written price and no separate travel fee. As a rough guide, the drywall installation Niagara Region jobs we price run about $2.00–$5.50 per square foot turnkey. A finished basement in a St Catharines home sits toward the middle of that range across one big, straightforward area; a Level 5 great room in a Grimsby escarpment estate — detail work, higher ceilings, a glass-smooth finish — runs nearer the top. Pick a finish level below; a fuller cost breakdown sits further down, and the full method behind these numbers lives on our drywall installation services page.

standard

Level 3

Garages, utility — under texture or heavy paint
$2.00–2.75 /sqft
finish smoothness
  • Board hung, seams taped, corners beaded
  • Two–three coats, sanded
  • Ready for texture or heavy paint
  • 2-year workmanship warranty
Min. labour charge$800
Choose Level 3
most chosen

Level 4

Standard rooms — ready for regular paint
$2.75–4.00 /sqft
finish smoothness
  • Everything in Level 3, plus:
  • Extra coat + careful sanding
  • Smooth — ready for standard paint
  • 5-year workmanship warranty
Min. labour charge$1,200
Choose Level 4
signature

Level 5

Full skim — high ceilings, raking light
$4.00–5.50 /sqft
finish smoothness
  • Everything in Level 4, plus:
  • Full skim coat, entire surface
  • Flawless under pot lights & raking light
  • 7-year workmanship warranty
Min. labour charge$2,500
Choose Level 5
— drywall installation estimate

Your drywall cost, in seconds.

Estimated turnkey
$2,200 – $3,200
Use this drywall installation cost calculator for a rough estimate, board supplied & finished. A free written quote sets the exact price for your project.
Rough cost by project (turnkey)
A single room (12×12-ish)$1,500–2,500
One- or two-car garage (Level 3)$1,500–3,000
A full basement$6,000–12,000+
A whole floor / new buildscales up
    What moves the number
  • Finish level — the biggest lever; Level 5 labour ≈ double Level 4.
  • Ceiling height & access — high ceilings, elevators, stairs add hours.
  • Board type — moisture, fire-rated and sound board cost more than 1/2".
  • Project size — bigger jobs are efficient per foot; small jobs carry a minimum.

The turnkey rate is the whole job — board delivered and hung, taped, beaded, screws spotted, three coats, sanded to your level, daily cleanup. Prefer to buy your own board? A labour-only rate starts around $1.50/sq ft. Per sheet, figure $30–70 to hang and finish a 4×8. These drywall installation prices are guide ranges — a free written quote sets the exact drywall install cost before any board goes up.

04
— finish levels explained

What you're actually paying for.

the level your Niagara room needs
Level 3 · standard
A little texture
Seams and screws taped and coated, surface left with slight texture. Perfect under heavy paint, wallpaper or sprayed texture — the budget-smart call for garages and utility rooms.
Level 4 · most chosen
Smooth, paint-ready
Everything in Level 3 plus an extra coat and careful sanding for an even surface that takes standard flat or eggshell paint cleanly. What most rooms in a home should be.
Level 5 · signature
Glass under any light
A thin skim coat over the entire surface — not just seams and screws. Nothing shows, even under pot lights, big windows or glossy paint. Worth it for feature walls and high ceilings.
05
— working with IntraBuild

Clean site. Clear schedule.

one written price

Written quote first

A full price tied to your square footage — and even though Niagara sits south of our base, the drywall installation Niagara homeowners book carries one written price with no separate travel fee tacked on after.

Dust controlled

Poly barriers and vacuum-assisted sanding keep drywall dust out of the rest of the home.

On schedule

Hang, tape, coat and sand days planned up front and coordinated with your other trades, and with your building's elevator and loading times.

Insured & paint-ready

Liability coverage before we start, and a sound, level surface your painter can walk straight onto.

06
— how a drywall finish comes together

Raw seam to glass.

same on every Niagara job
HangScrewTapeMudSand

Each stage has to be right before the next begins — and the mud coats need drying time between them, which is why good drywall can't be rushed. Ceilings go first: a drywall ceiling installation is boarded before the walls, so the wall sheets tuck up under it and support its edges. On residential walls the sheets usually run horizontally, though hanging drywall vertically suits some taller commercial walls — either way the aim is fewer, cleaner joints to finish.

07
— drywall installation FAQ

Answered.

asked all the time

Do you cover all of Niagara Region — St Catharines, Niagara Falls, Welland and Grimsby?

Yes — the whole peninsula. Niagara Region runs from the Garden City of St Catharines and the tourist city of Niagara Falls through canal-side Welland to the wine-country towns of Grimsby, Lincoln and Niagara-on-the-Lake, and we install drywall across every one of them. None of these municipalities has its own city page yet, so they're all covered right here on this Niagara Region page.

Do you do wine-country and escarpment estate homes in Grimsby, Lincoln and Niagara-on-the-Lake?

We do — that's a big part of what we cover. The lakeside, escarpment and wine-country estate homes in Grimsby, Lincoln and Niagara-on-the-Lake often mean custom builds, high ceilings and Level 5 skim coats: whole-home board and finish that stays glass-smooth under pot lights and big windows, priced by the square foot and coordinated with your other trades.

Do you do St Catharines student rentals near Brock?

Yes — student rentals around Brock University are a steady part of the drywall installation St Catharines landlords book. Patch and repair on turnover, whole-basement build-outs and full re-boards after damage, taped and sanded to your finish level with dust kept out of the rest of the property.

How much does drywall cost in Niagara?

Turnkey, figure about $2.00–2.75 per sq ft for Level 3, $2.75–4.00 for Level 4 and $4.00–5.50 for a Level 5 skim; a full basement usually lands around $6,000–12,000+. The drywall installation cost in Niagara depends on size, ceiling height and finish level — a free written quote sets the exact number for your project.

Do you travel to Niagara — is there a separate travel fee?

We do, and there's no separate travel fee. Niagara sits well south of our base, but the price we quote is one written price tied to your square footage — the same per-square-foot pricing anywhere in the region, from St Catharines and Niagara Falls to Grimsby and Fort Erie, with no travel line added after.

Drywall ceiling or walls first?

Ceilings first. It lets the wall sheets butt up tight underneath and support the ceiling edges, for cleaner, stronger joints.

How many screws per drywall sheet?

How many screws per sheet of drywall? On a 4×8 wall, roughly 28–32, and more on ceilings — staggered and set just below the surface so the board holds flat without breaking the paper.

I searched "drywall installers near me" — do you cover my part of Niagara?

Almost certainly. As drywall installers Niagara homeowners book directly, we cover the whole peninsula — St Catharines, Niagara Falls, Welland and Grimsby, out to Lincoln, Niagara-on-the-Lake, Fort Erie and Port Colborne. Tell us your municipality and neighbourhood and a drywall installer Niagara locals trust will confirm and come measure.

08
— where we work

The Niagara municipalities we cover.

St Catharines · Niagara Falls · Welland · Grimsby · lakeshore
St Catharines & Thorold
Established homes, downtown streets & Brock student rentals — plus plenty of finished basements.
Niagara Falls
Residential streets & tourist-corridor homes — new builds and renovations.
Welland & Port Colborne
Canal-side & family homes — additions and finished basements.
Grimsby, Lincoln & NOTL
Wine country — lakeside, escarpment & estate homes with high ceilings.
Fort Erie & the lakeshore
The south lakeshore — cottages & family homes.
Don't see your municipality? We install drywall right across Niagara Region — St Catharines, Niagara Falls, Welland and Grimsby, plus Lincoln, Niagara-on-the-Lake, Fort Erie and Port Colborne — get in touch and we'll confirm your area.
— more service areas

Drywall installation nearby.

Drywall installation isn't limited to Niagara Region — IntraBuild works right across the GTA and Southern Niagara Region, all on one written per-square-foot price with no separate travel fee.

— ready when you are

Get your Niagara Region drywall quote.

Searching for drywall installers near me anywhere in Niagara? Send us the space — a St Catharines basement, a Grimsby feature wall, a Niagara Falls or Welland renovation, a wine-country new build — and IntraBuild's Niagara Region drywall contractors will measure, recommend the finish level, price it by the square foot and set a schedule. Niagara sits south of our base, but there's still one written price with no travel fee and no waiting anywhere in the region. Free, and no pressure.

Get a free quote
Contact Us Now!​

* Get in touch now for expert drywall services and bring your project to life!

Get in touch