Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed
Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed
IntraBuild is a local York Region crew covering the whole region from the big cities to the family towns, so the drywall installation York Region homeowners and builders book runs on local scheduling — new luxury builds and established homes in Vaughan, new subdivisions and condos in Markham, estate and family homes in Richmond Hill, and family homes across Newmarket and Aurora. We hang the board, tape the seams and sand every surface smooth, priced honestly by the square foot.
IntraBuild is a York Region drywall installation crew that works right across the region — York is large and varied, from the big cities of Vaughan, Markham and Richmond Hill to the family towns of Newmarket and Aurora, and the rural townships of King and Georgina to the north. That means a local crew, fast scheduling, no travel fee, and the person who quotes your job is on site doing the work. We handle the drywall that York homeowners and builders rely on — new luxury builds in Vaughan, family homes and condos in Markham, estate homes in Richmond Hill, and additions up in Newmarket and Aurora. If you've searched "drywall installation near me" from anywhere in York, you've found your local crew. For the full picture of how we work, see our drywall installation services page — this page covers all of York Region and links down to our city pages.
Sheets set plumb and tight on walls and ceilings, joints staggered, cut cleanly around outlets, windows and light boxes.
Mesh or paper tape over every seam, with corner bead installation on each outside corner — metal or paper-faced bead so edges stay crisp and crack-free.
Fasteners set just below the surface in a staggered pattern — about 28–32 per sheet — then spotted so nothing shows through paint.
Three coats of compound minimum, feathered wide, then sanded and dust-controlled to Level 3, 4 or 5.
New luxury builds and established homes right across Vaughan — Woodbridge, Maple, Kleinburg and Thornhill. The drywall installation Vaughan homeowners and builders expect: flawless Level 5 walls in custom homes, plus whole-home board and finish on new detached builds, handled by a local crew.
New subdivisions, condos and family homes throughout Markham — Unionville, Cornell and Milliken. The drywall installation Markham relies on: whole-home board and finish, finished basements and renovations, coordinated with your framer, electrician and painter.
Estate and family homes across Richmond Hill, including Oak Ridges and Bayview Hill. Richmond Hill drywall installation on larger main floors and higher ceilings — Level 4 and Level 5 finishes that stay glass-smooth under pot lights and big windows, priced by the square foot.
Family towns and subdivisions across Newmarket and Aurora, plus the rural and estate homes up in King, Georgina and Whitchurch-Stouffville. Additions, detached-home board & finish and higher ceilings handled cleanly, with the same per-square-foot pricing as the rest of York.
The drywall installation cost across York Region comes down to area, so we quote by the square foot rather than a flat guess — board supplied and finished. As a rough guide, the drywall installation York Region jobs we price run about $2.00–$5.50 per square foot turnkey. A finished basement in a Richmond Hill home sits toward the middle of that range across one big, straightforward area; a Level 5 main floor in a Vaughan new-build — detail work, higher ceilings, a glass-smooth finish — runs nearer the top. Pick a finish level below; a fuller cost breakdown sits further down, and the full method behind these numbers lives on our drywall installation services page.
| A single room (12×12-ish) | $1,500–2,500 |
|---|---|
| One- or two-car garage (Level 3) | $1,500–3,000 |
| A full basement | $6,000–12,000+ |
| A whole floor / new build | scales up |
The turnkey rate is the whole job — board delivered and hung, taped, beaded, screws spotted, three coats, sanded to your level, daily cleanup. Prefer to buy your own board? A labour-only rate starts around $1.50/sq ft. Per sheet, figure $30–70 to hang and finish a 4×8. These drywall installation prices are guide ranges — a free written quote sets the exact drywall install cost before any board goes up.
A full price tied to your square footage — and because we're local to York, no separate travel fee tacked on after.
Poly barriers and vacuum-assisted sanding keep drywall dust out of the rest of the home.
Hang, tape, coat and sand days planned up front and coordinated with your other trades — and with your building's elevator and loading times anywhere in York.
Liability coverage before we start, and a sound, level surface your painter can walk straight onto.
Each stage has to be right before the next begins — and the mud coats need drying time between them, which is why good drywall can't be rushed. Ceilings go first: a drywall ceiling installation is boarded before the walls, so the wall sheets tuck up under it and support its edges. On residential walls the sheets usually run horizontally, though hanging drywall vertically suits some taller commercial walls — either way the aim is fewer, cleaner joints to finish.
Yes — the whole region. York Region runs from Vaughan, Markham and Richmond Hill up through Newmarket and Aurora to the rural townships in the north, and we install drywall across every one of them. Aurora has its own dedicated city page (drywall installation Aurora); Vaughan, Markham, Richmond Hill and the rest are covered right here on this York Region page.
We do — that's a big part of what we cover. The drywall installation Vaughan and Markham builders book runs to new luxury homes in Woodbridge, Kleinburg and the newer Markham subdivisions: whole-home board and finish, feature walls and Level 5 skim coats, priced by the square foot and coordinated with your other trades.
Yes. Richmond Hill drywall installation on estate and family homes — Oak Ridges, Bayview Hill and the larger lots around them — often means higher ceilings, open great rooms and Level 5 finishes that stay glass-smooth under pot lights and big windows. We handle the board and finish on all of it.
Turnkey, figure about $2.00–2.75 per sq ft for Level 3, $2.75–4.00 for Level 4 and $4.00–5.50 for a Level 5 skim; a full basement usually lands around $6,000–12,000+. The drywall installation cost in York Region depends on size, ceiling height and finish level — a free written quote sets the exact number for your project.
We do. King, Georgina and Whitchurch-Stouffville — the rural and estate homes up in the north of York Region — often mean detached homes, additions and higher ceilings. We handle the board and finish on all of it, priced by the square foot the same as anywhere else in York.
Ceilings first. It lets the wall sheets butt up tight underneath and support the ceiling edges, for cleaner, stronger joints.
How many screws per sheet of drywall? On a 4×8 wall, roughly 28–32, and more on ceilings — staggered and set just below the surface so the board holds flat without breaking the paper.
Almost certainly. As drywall installers York homeowners book directly, we cover the whole region — Vaughan, Markham, Richmond Hill, Newmarket and Aurora, right up to King and Georgina. Tell us your municipality and neighbourhood and a drywall installer York locals trust will confirm and come measure.
Drywall installation isn't limited to York Region — IntraBuild works right across the GTA and Southern York Region, all on one written per-square-foot price with no separate travel fee.
Searching for drywall installers near me anywhere in York? Send us the space — a Vaughan feature wall, a Markham basement, a Richmond Hill great room, a Newmarket addition — and IntraBuild's York Region drywall contractors will measure, recommend the finish level, price it by the square foot and set a schedule. We're local to York, so there's no travel fee and no waiting anywhere in the region. Free, and no pressure.
Get a free quote