Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed
Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed
Aurora is a York-Region town of estate and family homes, and IntraBuild does the drywall installation Aurora homeowners and builders count on — whole-home board for the large detached houses of Aurora Highlands and Bayview Wellington, additions and renovations on the character homes around Aurora Village, and the basements people finish once the family grows. We hang the board, tape the seams and sand every surface smooth, priced honestly by the square foot.
IntraBuild covers Aurora drywall installation across one of York Region's estate-and-family towns — the large detached homes with high ceilings and great rooms, the historic downtown around Aurora Village with its older character houses, and the new estate subdivisions filling in the Bayview and northeast areas. Our crew hangs the board (drywall is also called sheetrock or wallboard), tapes and coats the seams, and skims to the finish level your walls need — one local crew, no travel fee across town. If you've searched "drywall installation near me" from an Aurora address, this is your crew. For the full picture of how we work, see our drywall installation services page — this page covers what's specific to Aurora: whole-home finishes for estate and family homes, and matching new drywall into the walls of established downtown homes.
Sheets set plumb and tight on walls and ceilings, joints staggered, cut cleanly around outlets, windows and light boxes.
Mesh or paper tape over every seam, with corner bead installation on each outside corner — metal or paper-faced bead so edges stay crisp and crack-free.
Fasteners set just below the surface in a staggered pattern — about 28–32 per sheet — then spotted so nothing shows through paint.
Three coats of compound minimum, feathered wide, then sanded and dust-controlled to Level 3, 4 or 5.
The large detached houses that fill Aurora Highlands, Regency Acres and Bayview Wellington — high ceilings, two-storey great rooms, tray and coffered detail. We handle the whole-home board and finish, worked from the builder's detail so every reveal and ceiling comes out crisp and consistent from the front hall to the top floor.
Established Aurora homes and the older downtown character houses around Aurora Village and Town Park, where an addition or reno has to disappear into what's already there. We match new drywall to the height, thickness and trim lines of the existing walls, feathering the transition so the new work never reads as a patch.
New builds going up across the Bayview and northeast areas — Bayview Wellington, Bayview Northeast and Aurora Grove. Every level hung, taped and sanded, sequenced around your framer, electrician and painter and coordinated with your other trades so drywall never becomes the bottleneck on a fast-moving new build.
Finishing lower levels once the family grows — moisture-aware board below grade, neat cuts around the ducts, beams and bulkheads a builder leaves exposed, and a smooth surface ready for a family room, gym, home office or extra bedroom. Clean, paint-ready work without disturbing the rest of the house.
The drywall installation cost Aurora homeowners pay comes down to area, so we quote by the square foot rather than a flat guess — board supplied and finished. As a rough guide, the drywall installation Aurora jobs we price run about $2.00–$5.50 per square foot turnkey. A Bayview estate great room — high ceilings, big windows, a smoother finish and tighter cuts up high — runs nearer the top of that range; an addition matched into an Aurora Village home, boarded and taped to blend with the existing walls and trim, sits toward the lower-middle. Pick a finish level below; a fuller cost breakdown sits further down, and the full method behind these numbers lives on our drywall installation services page.
| A single room (12×12-ish) | $1,500–2,500 |
|---|---|
| One- or two-car garage (Level 3) | $1,500–3,000 |
| A full basement | $6,000–12,000+ |
| A whole floor / new build | scales up |
The turnkey rate is the whole job — board delivered and hung, taped, beaded, screws spotted, three coats, sanded to your level, daily cleanup. Prefer to buy your own board? A labour-only rate starts around $1.50/sq ft. Per sheet, figure $30–70 to hang and finish a 4×8. These drywall installation prices are guide ranges — a free written quote sets the exact drywall install cost before any board goes up.
A full price tied to your square footage — a local crew, so no separate travel fee tacked on after.
Poly barriers and vacuum-assisted sanding keep drywall dust out of the rest of the home.
Hang, tape, coat and sand days planned up front and coordinated with your other trades — the same whether it's an Aurora Village renovation or a new estate build in Bayview Wellington.
Liability coverage before we start, and a sound, level surface your painter can walk straight onto.
Each stage has to be right before the next begins — and the mud coats need drying time between them, which is why good drywall can't be rushed. Ceilings go first: a drywall ceiling installation is boarded before the walls, so the wall sheets tuck up under it and support its edges. On residential walls the sheets usually run horizontally, though hanging drywall vertically suits some taller commercial walls — either way the aim is fewer, cleaner joints to finish.
Yes — it's a lot of what Aurora asks for. We board and finish the large detached houses of Aurora Highlands, Regency Acres and the Hills of St Andrew — high ceilings, two-storey great rooms, tray and coffered ceilings, curved walls and archways — working from the builder's detail so the reveals and radii come out crisp and consistent. Level 5 goes anywhere pot lights or raking light down a tall wall would show a seam.
Yes. On additions and renovations to established homes and the downtown character houses around Aurora Village and Town Park, we match the new drywall to the height, thickness and trim lines of the existing walls — feathering the transition and skimming as needed so the new work disappears into the old rather than reading as a patch.
Yes — new estate builds across Bayview Wellington, Bayview Northeast and Aurora Grove are steady work. We take the whole-home board and finish floor to ceiling, sequenced around your framer, electrician and painter and coordinated with your other trades so drywall keeps pace with a fast-moving build.
Yes — lower levels are steady work here. We hang moisture-aware board below grade, cut neatly around the ducts, beams and bulkheads a builder leaves exposed, and finish it smooth and ready for a family room, gym, home office or extra bedroom. You get a clean, paint-ready space without disturbing the rest of the house.
Turnkey, figure about $2.00–2.75 per square foot for Level 3, $2.75–4.00 for a standard Level 4 and $4.00–5.50 for a Level 5 skim. A Bayview estate great room with high ceilings and a smoother finish sits higher; an addition matched into an Aurora Village home is efficient per foot. The drywall installation cost in Aurora depends on size, ceiling height and finish level — a free written quote sets the exact number.
Ceilings first. It lets the wall sheets butt up tight underneath and support the ceiling edges, for cleaner, stronger joints — which matters even more on the high ceilings common in Aurora's estate homes.
How many screws per sheet of drywall? On a 4×8 wall, roughly 28–32, and more on ceilings — staggered and set just below the surface so the board holds flat without breaking the paper.
Almost certainly. As drywall installers Aurora homeowners and builders book directly, we cover the whole town and the surrounding York Region — Aurora Village and Town Park, Aurora Highlands and Regency Acres, Bayview Wellington and Bayview Northeast, the Hills of St Andrew, Aurora Grove and rural Aurora. Tell us your neighbourhood and a drywall installer Aurora locals trust will confirm and come measure.
Drywall installation isn't limited to Aurora — IntraBuild works right across the GTA and Southern Aurora, all on one written per-square-foot price with no separate travel fee.
Searching for drywall installers near me in Aurora? Send us the space — a Bayview estate great room in Level 5, a whole-home finish in Aurora Highlands, an addition matched into an Aurora Village character home or a basement waiting to be finished — and IntraBuild's Aurora drywall contractors will measure, recommend the finish level, price it by the square foot and set a schedule around your job. One local crew, no travel fee. Free, and no pressure.
Get a free quote