Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed
Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed
Milton is one of Canada's fastest-growing towns, and IntraBuild does the drywall installation Milton's new master-planned neighbourhoods keep needing — whole-home board on new detached houses and the finished basements young families add once they've moved in, from Ford and Willmott to Scott and Harrison. We hang the board, tape the seams and sand every surface smooth, priced honestly by the square foot.
IntraBuild covers Milton drywall installation across one of Canada's fastest-growing towns — where master-planned communities of new detached homes keep rising near the Niagara Escarpment, and new-build basements sit waiting to be finished. We run out of our Mississauga base right next door, so Milton gets a local crew, quick scheduling and no travel fee. The drywall installation Milton keeps needing is our daily work: whole-home board on new detached builds, finishing the basements builders leave bare, tray ceilings and feature walls, additions and everyday rooms. If you've searched "drywall installation near me" from a Milton address, you've found your crew. For the full picture of how we work, see our drywall installation services page — this page covers what's specific to Milton: new-home coordination, builder-basement finishing and the ceiling upgrades new detached homes are built ready for.
Sheets set plumb and tight on walls and ceilings, joints staggered, cut cleanly around outlets, windows and light boxes.
Mesh or paper tape over every seam, with corner bead installation on each outside corner — metal or paper-faced bead so edges stay crisp and crack-free.
Fasteners set just below the surface in a staggered pattern — about 28–32 per sheet — then spotted so nothing shows through paint.
Three coats of compound minimum, feathered wide, then sanded and dust-controlled to Level 3, 4 or 5.
Whole-home board and finish for the master-planned detached houses going up across Milton's newer communities. Every floor hung, taped and sanded, sequenced around your framer, electrician and painter so drywall never becomes the bottleneck on a fast-moving new build.
The biggest local project by far. Most Milton homes are sold with the basement left as bare studs and concrete, and finishing it is where we spend much of the week — moisture-aware board below grade, neat cuts around the ducts, beams and bulkheads a builder leaves exposed, and a smooth surface ready for the family room, gym or extra bedroom downstairs.
The details builders skip. Tray ceilings, coffers, dropped bulkheads and feature walls that turn a standard new-build room into something custom — framed, boarded and finished crisp, and skimmed to Level 5 anywhere pot lights or raking light would show a flaw.
Milton sits right next door to our home base, so there's no crew driving in from across the GTA and no travel fee. Quick scheduling means we can usually get a measure booked within days and board going up soon after.
The drywall installation cost Milton homeowners pay comes down to area, so we quote by the square foot rather than a flat guess — board supplied and finished. As a rough guide, the jobs we price around town run about $2.00–$5.50 per square foot turnkey. A new-build main floor in Ford — big, square, straightforward rooms — sits toward the lower-middle of that range; finishing a builder basement in Scott, with moisture-aware board, a smoother finish and tighter cuts around ducts and bulkheads, runs nearer the top. Pick a finish level below; a fuller cost breakdown sits further down, and the full method behind these numbers lives on our drywall installation services page.
| A single room (12×12-ish) | $1,500–2,500 |
|---|---|
| One- or two-car garage (Level 3) | $1,500–3,000 |
| A full basement | $6,000–12,000+ |
| A whole floor / new build | scales up |
The turnkey rate is the whole job — board delivered and hung, taped, beaded, screws spotted, three coats, sanded to your level, daily cleanup. Prefer to buy your own board? A labour-only rate starts around $1.50/sq ft. Per sheet, figure $30–70 to hang and finish a 4×8. These drywall installation prices are guide ranges — a free written quote sets the exact drywall install cost before any board goes up.
A full price tied to your square footage — and because we're right next door, no separate travel fee tacked on after.
Poly barriers and vacuum-assisted sanding keep drywall dust out of the rest of the home.
Hang, tape, coat and sand days planned up front and coordinated with your other trades, so the drywall stage never holds up the framer, electrician or painter on a Milton build.
Liability coverage before we start, and a sound, level surface your painter can walk straight onto.
Each stage has to be right before the next begins — and the mud coats need drying time between them, which is why good drywall can't be rushed. Ceilings go first: a drywall ceiling installation is boarded before the walls, so the wall sheets tuck up under it and support its edges. On residential walls the sheets usually run horizontally, though hanging drywall vertically suits some taller commercial walls — either way the aim is fewer, cleaner joints to finish.
Yes — it's the single busiest part of our Milton work. Most new homes here are sold with the basement left as bare studs and concrete, so we hang moisture-aware board below grade, cut neatly around the ducts, beams and bulkheads a builder leaves exposed, and finish it smooth and ready for a family room, gym or extra bedroom. You get a clean, paint-ready basement without disturbing the rest of the house.
Yes. Finishing a basement or adding a tray ceiling in a newer Milton home is your own project, separate from the builder's warranty on the base house. We board and finish the new space cleanly and leave the existing warrantied areas untouched — just check your warranty terms before altering anything the builder originally finished.
That's some of our favourite work. New detached homes are often built ceiling-ready but plain, so we frame and board tray ceilings, coffers, dropped bulkheads and feature walls after the fact — then finish them to Level 5 anywhere pot lights or raking light would show a seam.
Turnkey, figure about $2.00–2.75 per square foot for Level 3, $2.75–4.00 for a standard Level 4 and $4.00–5.50 for a Level 5 skim. A whole new-build floor is efficient per foot; a finished basement with moisture-aware board and a smoother finish sits higher. The drywall installation cost in Milton depends on size, ceiling height and finish level — a free written quote sets the exact number.
All of them, and the rest of town. We're across Ford and Willmott, Scott and Harrison, Coates and Dempsey, Beaty and Bronte Meadows, Timberlea and Old Milton, Cobban and Walker. Tell us your street and we'll confirm and come measure.
Ceilings first. It lets the wall sheets butt up tight underneath and support the ceiling edges, for cleaner, stronger joints — which matters on the tray ceilings and bulkheads common in newer Milton homes.
How many screws per sheet of drywall? On a 4×8 wall, roughly 28–32, and more on ceilings — staggered and set just below the surface so the board holds flat without breaking the paper.
Almost certainly. As drywall installers Milton homeowners and builders book directly, we cover the whole town — Ford and Willmott, Scott and Harrison, Coates and Dempsey, Beaty and Bronte Meadows, Timberlea and Old Milton, Cobban and Walker. Tell us your neighbourhood and a drywall installer Milton locals trust will confirm and come measure.
Drywall installation isn't limited to Milton — IntraBuild works right across the GTA and Southern Milton, all on one written per-square-foot price with no separate travel fee.
Searching for drywall installers near me in Milton? Send us the space — a new-build main floor in Ford, an unfinished builder basement in Scott, a tray ceiling the builder skipped — and IntraBuild's Milton drywall contractors will measure, recommend the finish level, price it by the square foot and set a schedule around your build. We run from right next door, so there's no travel fee and no waiting. Free, and no pressure.
Get a free quote