Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed

Drywall Installation Toronto | Priced Per Sq Ft | IntraBuild
TORONTO.
Drywall installation · Toronto, Toronto

Drywall Installation
in Toronto

From downtown condos and North York high-rises to houses in Etobicoke and Scarborough, IntraBuild handles the drywall installation Toronto homeowners and builders rely on — hanging the board, taping the seams and sanding every surface smooth, priced honestly by the square foot.

Priced per sq ft
Level 3–5 finish
Written quote first
Drywall installation in Toronto — multi-level bulkhead ceiling
48h
Written quote turnaround
L3–5
Finish levels offered
3 coats
Minimum on every seam
Full
Price — no trip fee
L3coat
L4smooth
L5
48hQuote turnaround
Level 5Glass-smooth option

IntraBuild handles Toronto drywall installation across the city — condos and high-rises, new builds, finished basements, additions and older homes, from the downtown core out to North York, Etobicoke and Scarborough. Our crew hangs the board (drywall is also called sheetrock or wallboard), tapes and coats the seams, and sands to the finish level your walls need. If you've searched "drywall installation near me" from a Toronto address, this is it. For the full picture of how we work, see our drywall installation services page — this page covers what's specific to Toronto: condo board rules, downtown access and matching plaster in the city's older houses.

01
— what we install in Toronto

Board, tape, corners, coats.

far more than screwing up sheets

Hanging drywall

Sheets set plumb and tight on walls and ceilings, joints staggered, cut cleanly around outlets, windows and light boxes.

Taping & corner bead

Mesh or paper tape over every seam, with corner bead installation on each outside corner — metal or paper-faced bead so edges stay crisp and crack-free.

Screw spotting

Fasteners set just below the surface in a staggered pattern — about 28–32 per sheet — then spotted so nothing shows through paint.

Finishing to a level

Three coats of compound minimum, feathered wide, then sanded and dust-controlled to Level 3, 4 or 5.

Standard 1/2" — walls & ceilings Moisture-resistant — baths & laundry Fire-rated 5/8" Type X — garages, code spots Sound-dampening — bedrooms, media rooms Sag-resistant ceiling board
02
— what makes Toronto different

Condos, cores, older homes.

the local realities we plan for

Condo & high-rise drywall

Most downtown and North York towers have rules. We book the service elevator, provide a certificate of insurance for the property manager, and get contractor pre-approval — plan one to two weeks for building sign-off before any board goes up.

Access & parking downtown

Tight streets, permit parking and loading docks are just part of a downtown job. We schedule board delivery and timing around them — no downtown surcharge, only a little more planning.

Older homes — plaster or drywall

Many houses in the Annex, Riverdale or Leslieville are lath-and-plaster. We patch and match plaster where it makes sense, or board over it for a clean drywall surface — and on homes built before 1978 we work carefully around older materials.

New builds, basements & additions

From gutted semis in the east end to new infill and finished basements across the city — whole floors boarded and finished, coordinated with your framer, electrician and painter.

03
— drywall installation cost in Toronto

Priced by the square foot.

per sq ft, never a flat guess

The drywall installation cost Toronto homeowners pay still comes down to area, so we quote by the square foot rather than a flat guess — board supplied and finished. As a rough guide, drywall installation prices Toronto homeowners see run about $2.00–$5.50 per square foot turnkey, with city jobs sitting toward the top of each band for access, parking and elevator time. A downtown condo bedroom lands near the low end of a room; a gutted semi in the east end with high ceilings runs higher. Pick a finish level below; a fuller cost breakdown sits further down, and the full method behind these numbers lives on our drywall installation services page.

standard

Level 3

Garages, utility — under texture or heavy paint
$2.00–2.75 /sqft
finish smoothness
  • Board hung, seams taped, corners beaded
  • Two–three coats, sanded
  • Ready for texture or heavy paint
  • 2-year workmanship warranty
Min. labour charge$800
Choose Level 3
most chosen

Level 4

Standard rooms — ready for regular paint
$2.75–4.00 /sqft
finish smoothness
  • Everything in Level 3, plus:
  • Extra coat + careful sanding
  • Smooth — ready for standard paint
  • 5-year workmanship warranty
Min. labour charge$1,200
Choose Level 4
signature

Level 5

Full skim — high ceilings, raking light
$4.00–5.50 /sqft
finish smoothness
  • Everything in Level 4, plus:
  • Full skim coat, entire surface
  • Flawless under pot lights & raking light
  • 7-year workmanship warranty
Min. labour charge$2,500
Choose Level 5
— drywall installation estimate

Your drywall cost, in seconds.

Estimated turnkey
$2,200 – $3,200
Use this drywall installation cost calculator for a rough estimate, board supplied & finished. A free written quote sets the exact price for your project.
Rough cost by project (turnkey)
A single room (12×12-ish)$1,500–2,500
One- or two-car garage (Level 3)$1,500–3,000
A full basement$6,000–12,000+
A whole floor / new buildscales up
    What moves the number
  • Finish level — the biggest lever; Level 5 labour ≈ double Level 4.
  • Ceiling height & access — high ceilings, elevators, stairs add hours.
  • Board type — moisture, fire-rated and sound board cost more than 1/2".
  • Project size — bigger jobs are efficient per foot; small jobs carry a minimum.

The turnkey rate is the whole job — board delivered and hung, taped, beaded, screws spotted, three coats, sanded to your level, daily cleanup. Prefer to buy your own board? A labour-only rate starts around $1.50/sq ft. Per sheet, figure $30–70 to hang and finish a 4×8. These drywall installation prices are guide ranges — a free written quote sets the exact drywall install cost before any board goes up.

04
— finish levels explained

What you're actually paying for.

the level your Toronto room needs
Level 3 · standard
A little texture
Seams and screws taped and coated, surface left with slight texture. Perfect under heavy paint, wallpaper or sprayed texture — the budget-smart call for garages and utility rooms.
Level 4 · most chosen
Smooth, paint-ready
Everything in Level 3 plus an extra coat and careful sanding for an even surface that takes standard flat or eggshell paint cleanly. What most rooms in a home should be.
Level 5 · signature
Glass under any light
A thin skim coat over the entire surface — not just seams and screws. Nothing shows, even under pot lights, big windows or glossy paint. Worth it for feature walls and high ceilings.
05
— working with IntraBuild

Clean site. Clear schedule.

one written price

Written quote first

A full price tied to your square footage — no separate travel fee tacked on after.

Dust controlled

Poly barriers and vacuum-assisted sanding keep drywall dust out of the rest of the home.

On schedule

Hang, tape, coat and sand days planned up front and coordinated with your other trades — and with your Toronto building's elevator and loading times.

Insured & paint-ready

Liability coverage before we start, and a sound, level surface your painter can walk straight onto.

06
— how a drywall finish comes together

Raw seam to glass.

same on every Toronto job
HangScrewTapeMudSand

Each stage has to be right before the next begins — and the mud coats need drying time between them, which is why good drywall can't be rushed. Ceilings go first: a drywall ceiling installation is boarded before the walls, so the wall sheets tuck up under it and support its edges. On residential walls the sheets usually run horizontally, though hanging drywall vertically suits some taller commercial walls — either way the aim is fewer, cleaner joints to finish.

07
— drywall installation FAQ

Answered.

asked all the time

Do you need condo board approval or a certificate of insurance?

In most Toronto condos and high-rises, yes. The property manager will usually want a certificate of insurance, a booked service elevator and contractor pre-approval before work starts. Send us the building and we'll handle the paperwork — just plan one to two weeks for sign-off.

What about access and parking downtown?

It's just part of the job in the core. We schedule board delivery around loading docks, permit parking and elevator windows — there's no downtown surcharge, only a bit more planning.

My house has plaster — can you match it or should I switch to drywall?

Both are common in Toronto's older homes. On lath-and-plaster walls in the Annex, Riverdale or the Beaches we can patch and match, or board over for a clean drywall surface. On houses built before 1978 we work carefully around older materials.

How much does drywall cost in Toronto?

Turnkey, figure about $2.00–2.75 per square foot for Level 3, $2.75–4.00 for a standard Level 4 and $4.00–5.50 for a Level 5 skim. Drywall installation cost in Toronto tends to sit at the top of each band because of access, parking and elevator time. A free written quote sets the exact number.

Drywall ceiling or walls first?

Ceilings first. It lets the wall sheets butt up tight underneath and support the ceiling edges, for cleaner, stronger joints.

How many screws per drywall sheet?

How many screws per sheet of drywall? On a 4×8 wall, roughly 28–32, and more on ceilings — staggered and set just below the surface so the board holds flat without breaking the paper.

How long does it take?

A single room is often a day or two hang-to-sand; a full basement runs several days, since each mud coat has to dry before the next. Condo elevator bookings can add a little to the schedule — you get the plan up front.

I searched "drywall installers near me" — do you cover my part of Toronto?

Almost certainly. As drywall installers Toronto homeowners book directly, we work from the downtown core out to North York, Etobicoke and Scarborough, plus the east and west ends. Tell us your neighbourhood and a drywall installer Toronto locals trust will confirm and come measure.

08
— where we work

Every corner of Toronto.

downtown to the suburbs
Downtown & the core
Yorkville, the Annex, Liberty Village, King West, CityPlace, the Distillery District, Cabbagetown and Kensington.
East end
Riverdale, Leslieville, the Beaches and along the Danforth.
West end
Roncesvalles, Parkdale, High Park and the Junction.
Midtown
Yonge & Eglinton, Forest Hill, Rosedale and Lawrence Park.
North York
Willowdale, Bayview Village and Don Mills.
Etobicoke & Scarborough
Mimico, the Kingsway, Agincourt and Guildwood.
Don't see your neighbourhood? We install drywall right across the city — get in touch and we'll confirm your area.
— more service areas

Drywall installation nearby.

Drywall installation isn't limited to Toronto — IntraBuild works right across the GTA and Southern Toronto, all on one written per-square-foot price with no separate travel fee.

— ready when you are

Get your Toronto drywall quote.

Searching for drywall installers near me in Toronto? Send us the space — a downtown condo, a basement in the east end, a whole build — and IntraBuild's Toronto drywall contractors will measure, recommend the finish level, price it by the square foot and set a schedule around your building. Free, and no pressure.

Get a free quote
Contact Us Now!​

* Get in touch now for expert drywall services and bring your project to life!

Get in touch