Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed
Working Hours: Mon - Fri: 9:00 to 18:00 | Sat - Sun : Closed
Headwaters country keeps two kinds of drywall jobs coming. In Orangeville, Shelburne and Grand Valley it's subdivisions, additions and basements getting finished one street at a time. Out on the concession roads of Mono, Mulmur and Amaranth it's farmhouses, shops and country custom builds. IntraBuild boards, tapes and sands them all — a crew that shows up when it said it would, a price set per square foot, and nothing extra for the drive.
Dufferin County needs one drywall crew for the whole map, and IntraBuild is built to be it. Orangeville anchors the county: commuter families, an old downtown along Broadway, newer subdivisions ringing it, and basements being finished on every second street. Shelburne and Grand Valley are growing quicker than almost anywhere nearby, mostly in brand-new homes that need boarding top to bottom. Then the county opens up — Hockley Valley builds in Mono, hilltop customs in Mulmur, working farm properties through Amaranth and Melancthon where the job might be a farmhouse addition or a heated shop. We treat every address the same. One person measures and quotes; the same crew hangs, tapes and sands. The price is written, it's per square foot, and a long gravel driveway doesn't add a dime. If "drywall installation near me" brought you here from a Dufferin postal code, this page is the destination. How we price and build is documented on our drywall installation services page — coverage for Dufferin County lives right here.
Walls and ceilings sheeted tight to the framing. Joints staggered. Openings for boxes, windows and lights cut clean, not chewed.
Every seam gets tape bedded in mud. Every outside corner gets bead — metal or paper-faced — so the edge stays sharp through years of bumps.
Around 28–32 fasteners per sheet, staggered, sunk just below the paper. Each one spotted with compound so paint shows none of them.
Three coats minimum, feathered out wide. Then sanding on vacuum extractors until the surface meets Level 3, 4 or 5.
Orangeville housing runs from century homes near Broadway to nineties subdivisions to brand-new phases on the town's edge. Most calls here are basements: the framing is up, and our part is board — moisture-smart sheets by the bathroom rough-in, three coats on every seam, and a sanding that leaves the ceiling clean under pot lights. Additions and garage conversions fill the rest of the calendar.
These two towns barely resemble their old maps. New surveys keep opening, and every house in them needs boarding. We take whole homes from bare studs to paint-ready, floor by floor, then come back a few years later when the owners decide to finish the basement. Same square-foot rate both times.
Country properties in the hills bring the interesting ceilings — vaults over great rooms, lofts, walls of glass throwing hard light across every surface. That light is exactly what a Level 5 skim exists for, and it's a big share of our work up here. Farm properties add shops, studios and barn offices, and the drive out never appears on the invoice.
The flat townships north and west run on agriculture, and the drywall work follows suit: farmhouse renovations, additions built for the next generation, outbuilding interiors that deserve properly finished walls. We board them plumb, keep the dust contained and sand to the level the room actually needs.
Drywall pricing in Dufferin County stays simple if you keep it honest: count the square feet. Our quotes bundle board, hanging, tape, bead, coats and sanding into one written figure — travel included — and nearly every job lands inside $2.00–$5.50 per square foot turnkey. A Shelburne new build finished to Level 4 sits low in that band. A Mulmur great room vaulted and skimmed to Level 5 climbs toward the top of it. Pick a tier below, run the slider for a ballpark, and read the full pricing method on our drywall installation services page.
| Single room around 12×12 | $1,500–2,500 |
|---|---|
| Garage — one or two cars (Level 3) | $1,500–3,000 |
| Basement, the whole level | $6,000–12,000+ |
| Full floor or complete new build | scales up |
That turnkey rate buys the full job: board dropped and hung, tape and bead, screws spotted, three coats, a sand to your level and cleanup before we leave each day. Buying board yourself? A labour-only arrangement runs from about $1.50/sq ft — call it $30–70 to hang and finish each 4×8 sheet. Treat the ranges as guides; the free written quote locks in your real drywall install cost first.
We measure first, then hand over a complete written price built off the square footage. Orangeville cul-de-sac or Melancthon sideroad — same rate, and the travel line reads zero.
Poly goes up at the doorways and the sanders run vacuum heads. The rest of the house stays liveable while we work.
Hanging, coating and sanding days get booked up front and lined up with your other trades, so nobody stands around waiting on mud.
Liability coverage is active before the first sheet moves, and what your painter gets from us is flat, sound and ready for primer.
Drywall is sequential and stubborn about it. Mud has to dry between coats, so the finish takes the days it takes — rushing shows up later under paint. The ceiling gets boarded first; wall sheets then push up under it and hold its edge. On homes we usually hang sheets sideways, since horizontal runs mean fewer joints in awkward spots, while standing them vertical mostly pays off on tall commercial walls. Fewer seams to finish means a flatter wall.
Every one. Orangeville, Shelburne and Grand Valley, the Hockley Valley townships of Mono and Mulmur, plus rural Amaranth and Melancthon — all of it books through this page, since none of these towns has a standalone city page yet.
That's our most common Dufferin job. A framed lower level goes from studs to paint-ready: board up, moisture-tolerant sheets near the bathroom and laundry, seams taped to your chosen level, ceiling sanded clean for pot lights. Per-square-foot pricing, and a full basement usually totals about $6,000–12,000+ turnkey.
All the time. Hockley-area customs, hobby farms and estate homes bring vaulted great rooms and feature walls where raking light punishes sloppy work — we board them plumb and skim where it matters, then sand to your finish level. Shops, studios and additions ride on the same square-foot rate.
Turnkey: $2.00–2.75 per sq ft at Level 3, $2.75–4.00 at Level 4, $4.00–5.50 for a Level 5 skim. A complete basement generally comes in near $6,000–12,000+. Room size, ceiling height and level do the rest — the free written quote gives you the exact figure.
No. Orangeville, Shelburne, Grand Valley, Mono, Mulmur, Amaranth, Melancthon — one written per-square-foot price everywhere in Dufferin County, and the travel fee stays at zero no matter how long the driveway.
Ceiling first, every time. The wall sheets then support the ceiling's edges from below, which makes for tighter, longer-lasting joints.
About 28–32 for a 4×8 on a wall, more on ceilings. Staggered rows, heads set just below the surface with the paper unbroken — that's what keeps board flat.
If you're anywhere in the county, yes. Orangeville and Shelburne through Grand Valley, up into the Hockley hills and across the farm townships — tell us the town, we'll confirm coverage and book a time to come measure.
The crew doesn't stop at the Dufferin County line — the same written square-foot pricing travels across the GTA and Southern Ontario, never with a travel fee on top.
Tell us what you're building — an Orangeville basement, a Shelburne or Grand Valley new build, a vaulted Mono great room, a Melancthon farmhouse addition — and we'll come out and measure it. You get a recommended finish level, a written per-square-foot price with the travel already in it, and firm dates on the calendar. The quote costs nothing anywhere in Dufferin County, and nobody follows it up with pressure. That's the whole arrangement.
Get a free quote